Summer Slaycation Update #11

 

Here is some current news as to what I have been up to for those wondering:  http://kidschlocko.blogspot.com/2011/09/summer-slaycation-11-women-rastlin-and.html

I also did manage to finally field test my dollar store budget peel-and-stick blood, as you can see from the pic above, and the results were decent enough if shot right.

Peel-and-Stick Blood Splatters on a Dollar Store Budget

The wife showing off the peel-and-stick blood prop

For those who have been following my other blog, you may know that I have been experimenting with a way of creating a peel-and-stick static blood splatter prop.  The same kind that would be utilized on the show DEXTER.  The reason being is that sometimes you may find yourself on a film set or a haunted house attraction location in which no fake blood is allowed because of fears of stains, etc.  That is why this prop is ideal for such a case.

The current challenge of finding a really good blood splatter prop is the cost.  For those who, like me, who work with almost zero budgeted films finding a cost effective way of making or buying this prop is nearly impossible-til now.

After several batches and many failed attempts I have found a possible solution and it involves Elmer's Clear School Glue.  A item which is incredibly cheap at the moment due to all of the current back to school sales at places like Walmart and Target.

 Now let me share what I have learned so you too can make your own.

Supplies you will need:

• Elmer's Clear Washable Clear Glue
• Food Coloring of the primary colors, red, green, blue, yellow.
• Grafix Clear Sheeting, or a roll of any acetate sheeting such as the kind used for projectors.  In most art supply stores you can find a roll of it in the drafting/architecture aisle next to the myriad of rulers.
• Masking tape
• A sheet of foamcore board or a large sheet of cardboard
• A disposable clear plastic cup
• A disposable plastic spoon
• Patience.  Lots of patience.

Instructions:

1.  The first thing you will need is to roll out a large piece of acetate sheeting on a the foamcore board on a very flat surface and tape it down with the masking tape.

2. Pour the entire bottle of glue into the cup.  Then add a few drops of red, about six to seven drops.  You can add more if need be.  After the red add around one to two drops of green and one drop of blue.  You may have to experiment with the mixture to get it to the right kind of red you desire.

3.  On the acetate sheet, pour the mixture to make a large pool.  You can at this point tilt the board so it creates a realistic blood puddle.  The puddle will be a good size one.  However, if you need a large puddle you can double or triple the formula.  If doing such a thing it would be best to find a larger bottle of the glue online.

4.  To create drips, I made smaller puddles and tilted it and let it drip downward.  I also used the spoon to add lines of drips to craft it to the way I wanted.

5.  Wait around 24 hours for the mixture to fully dry.

6.  Here comes the tricky part.  The thicker the puddle the easier it will be to peel it off.  Yet, the thinner the puddle or splatter is the more challenging it is to peel it off, but it can be done.

7.  After the prop is used it can be reapplied back to its acetate sheet.  At this point I have no idea as to how many times it can be used.  But be sure to store in a cool and clean place in between usage.

Mistakes I have made and will correct next time:

The blood came out a decent red.  However, I might use a drop of black acrylic paint to darken the blood to add a bit more realism.  It was too see through for my taste.

Also because of the nature of the glue there were too many bubbles.  Using a toothpick to pop the bubbles helped a bit but I would like to find a better way of ridding them from the prop.

Peel and Stick Blood Splatters

On occassion when making a film, especially a horror flick, or even a live-action roleplaying game, the need to have a few blood splatters or pools of the red stuff may be needed. 

However, a challenge might be presented with the location or set being used when the red stuff absolutely must not touch the walls or floor in fear of ruining them.  So what does one do in such a situation?

The answer is to find a company that makes peel and stick blood pools and splatters and thanks to Eric Hart from Props Agenda I found the perfect place that make your own custom made blood splatters, pools, and even hand prints and more. 

The site can be found here and they do need at least two weeks notice for any custom made work and you will need to email or call the company for price quotes.  But one look at what amazing pieces can be made you will not want to go anywhere else. 

I highly recommend this company for anyone needing such a prop, and in my business I always could use them.
Go here for more details.